| The uClinux gnICE+ DEV Package is a low cost development package consisting of an gnICE+ JTAG, an EVAL-BF5xx Board and a CM-BF537E or CM-BF527 Core Module which is already pre-flashed with uBoot and uClinux. |
| This package includes the following Hardware: |
|
|
EVAL-BF5xx
Evaluation board for the Blackfin Core Modules (CM-BF533, CM-BF561, CM-BF537E, CM-BF537U and TCM-BF537). Besides connectors for all Core Module pins the Eval Board contains a SD Card connector and the following peripherals for the Core Modules: USB connector, Ethernet connector , CAN connector
|
 |
CM-BF537E
Blackfin DSP Processor Module powered by Analog Devices single core BF537 processor! Up to 750MHz, 32MB RAM, 4MB Flash, 35x30mm, 120 pin expansion connector.
WITH ETHERNET Phy
The Core Module is already pre-flashed with uBoot and uClinux.
|
 |
CM-BF527
The CM-BF527 module provides a rich set of peripherals at low power consumption (90nm Chip technology) and low cost. The CM-BF527 supports an on-board Ethernet 10/100Mbit function incl. physical transceiver as well as USB-OTG 2.0 function incl. physical transceiver as well as all other standard microcontroller interfaces. The module allows easy integration into high performance very space and power limited applications.
The Core Module is already pre-flashed with uBoot and uClinux.
|
 |
gnICE+ JTAG Adapter
The gnICE+ is a fast and low cost USB JTAG In-Circuit-Emulator for Blackfin processors. It’s designed to provide reliable JTAG debugging and CFI NOR Flash programming via USB. The gnICE+ JTAG Adapter Cable is an Open Source Hardware, based on the FT2232 chip from Future Technology Devices International Ltd.
|
| and the following Software: |
|
|
uClinux and uBoot
uClinux is a deriviate of linux which runs on Processors without MMU like the Blackfin Processor series.
The Core Module included in the package is already pre-flashed with uBoot and uClinux. Also included in the package is a support CD with a snapshot of the source files of uBoot and uClinux.
NOTE: Please download the current version of uBoot and uClinux from http://blackfin.uclinux.org/gf/project/bluetechnix/frs/.
|
|
| Features |
USB 2.0 Full Speed
JTAG Clock (TCK) 6 MHz
Link Status LED
|
|
|
| Order No. |
Info |
Status |
 |
100-3022 |
uClinux gnICE+ DEV Package
included in delivery:
EVAL-BF5xx + CM-BF537E + gnICE+ JTAG + uBoot + uClinux + Power supply
|
available prices ordering |
|
100-3044 |
uClinux gnICE+ DEV Package
included in delivery:
EVAL-BF5xx + CM-BF548 + gnICE+ JTAG + uBoot + uClinux + Power supply
|
available prices ordering |
|
100-3054 |
uClinux gnICE+ DEV Package
included in delivery:
EVAL-BF5xx + CM-BF527 + gnICE+ JTAG + uBoot + uClinux + Power supply
|
available prices ordering |
Check out the Ordering Information here
|